The Super Impeller for Industrial agitators are designed based on process parameters and bulk fluid velocity ensuring better process solution at lower process consumption. Our standard SA310 range of SUPER IMPELLERS provide axial flow for the liquid movement with less radial and rotational flow than standard pitched blade turbines, flat blade turbines and paddles.

Flow Pattern

The flow pattern produced by the SA310 Super Impeller is primarily the axial type. This flow pattern is significant as it imparts very low power consumption while improving the pumping of liquid. It also sweeps solid suspension off the reactor bottom.

Drag Minimization

In case of conventional Impellers, vortex is generates on the trailing edges of the blades as shown and which turn causes drag. The improved blade profile of the super Impeller reduces the vortex generation on the trailing edges of the blades and hence reduces the drag. The super impellers provide maximum pumping capacity with reduced energy.

Types of Super Impellers

There is wide range of the state of the art SUPER IMPELLERS based on different process parameters.

- SA Series   - for Axial Flow Requirement

- SR Series   - for Radial Flow Requirement

- SAR Series - for Combined Flow Requirement

Super Impeller Installation

SUPER IMPELLERS can be either installed on new vessel or on existing vessel. The SUPER IMPELLERS is available in any metallic construction. Substantial saving in capital investment is obtained due to lower size of the Gear Box and motor and Reduction in shaft diameter.

Advantages

• Designs Based on process requirement and vast experience.

• Imparts efficient mixing at lower power consumption.

• Ensures better process solutions.

• Low cost for new reactors as lower size of gearbox and motor and substantial savings in capital cost of Agitator assembly.

• Easy to replace in the existing system.