|
The
Genie AC power saves the electric energy by 10% to 20% in
three different ways:
-
There is a direct
fall in the amperage by 7% to 15% drawn by the air
conditioner. This fall in amperages (power consumption)
is due to the fall in the discharge pressure of the compressor
which go down by 5% to 15%. It is well understood that
lesser is the discharge pressure lesser will be the stress
on the compressor and all moving components. The life
of the compressor & all moving parts will be more
as the stress level due to high pressure are now reduced.
Additional advantage is the fall in vibrations and
also the noise levels are reduced (again due to reduced
discharge compressor pressured.) This also reflects positively
on the reduced maintenance cost as well.
-
The grill temperature
(evaporator side) falls by 20% to 30%. This reflects
in faster cooling and quicker thermostatic tripping of
the compressor. This leads to reduced on time and stretched
off time of the compressor. The faster cooling also
permits the shorter preoccupation cooling time and leads
to earlier tripping of compressor.
-
As the grill
temperature is reduced, the room humidity is also reduced. Now room temperature setting (on thermostat) can
be increased 1'C to 2'C. Since the humidity of chilled
air is reduced further, one feels the same comfort even
at a little higher (1 to 2'C) temperatures. This will
additionally reduce the ON time of the compressor.
Thus, One can achieve
10% to 20% of power saving in the air cooled air conditioning
units with the additional advantage of reduced maintenance,
less noise and less vibrations.
The Genie is boxed in
hot dip galvanized steel with powder coating on both sides
for long life. Additionally, for corrosion protection all
the water contact areas are FRP lined. There is a submersible
circulating pump, connecting pipes, solenoid valve, magnetic
auto high & low level controllers, a very innovative auto
blow down mechanism and a thermostatic cut off relay to avoid
too low condenser temperatures so that liquid refrigerant
doesn't flow to the compressor.
|
